Front Driveshaft, Stock to 2.5" Lift, 66-77 Ford Bronco

66-77 Ford Bronco

Condition: New

Part Number: 2940

0 reviews

Price: $299.00

Fits: 1966-77 Ford Bronco w/Spicer Yokes

New Front Stock Driveline for 66-77 Classic Ford Broncos, fits Broncos w/Spicer-Style Transfer Case Yoke. Comes complete & balanced. Generally fits Broncos with stock transmission and stock to 2.5" lift suspension. If you have a non-stock transmission, please measure and verify length needed prior to ordering. This driveshaft has a running length of 23 3/4 inch from center to center of the two outermost u-joints.

NOTE: If you have a Dana 30 with 2.5 inches of Suspension lift, you may want to purchase the extended version of this drive line, due to the fact the pinion support on a Dana 30 is shorter than a Dana 44, therefore requiring more length of the drive line. Give us a call with a running length measurement (from t-case yoke to axle yoke) and we can verify which one you would need.

The splines on our premium driveshafts are fully splined for much better and stronger engagement, whereas the splines on our standard driveshafts only extend a portion of the slip shaft.

Technical Information
Product Reviews

Fits 66-77 Ford Broncos with SPICER style transfer case yokes. If you have a Cleveland style yoke, you will need to also purchase a new transfer case yoke and driveline bolt kit to complete your installation. To tell if you have a Cleveland or Spicer style transfer case yoke, measure the distance between the mounting holes on the yoke where the driveshaft connects. A Cleveland yoke will measure 1 7/8" from center hole to center hole. A Spicer yoke will measure 1 1/2" from center hole to center hole.

NOTE: Please select your Transmission, Differential and Suspension Height using the drop-down menus. This will help us to double-check that the driveshaft you are ordering will be correct for your application. This is only for reference and not a guarantee of fitment for application. To ensure proper fitment, you should always verify that the running length of the driveshaft is appropriate for your application by measuring your current setup. See tech advice tab for a run-down of typical driveshaft applications (intended as a guide, not a guarantee of fitment).

Reviews

No reviews have been submitted.

Submit Your Own Review

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more