Skip to main content

1967 Ford Bronco Parts & Accessories – History & Specifications

The Broncos didn’t change a lot from the 1966 to the 1967 year model.  The stock engine was still a 170 ci inline six-cylinder with an option to upgrade to the 289 ci small block Ford V8.  In 1967, the U14 Half Cab Bronco was renamed from “Sport Utility” to “Pickup” by Ford’s marketing department.  Another notable change was the modification of the front and rear stock bumpers.  Where 1966 Ford Bronco bumpers were straight at the ends, in 1967 the stock Ford Bronco bumper was modified to taper back toward the fenders in the front and taper forward toward the quarter panels in the rear (the same bumper was used for the front and rear of the Bronco).  This gave the 1967 Ford Bronco a bit more fluid styling in comparison to the 66 Broncos.

Some other notable upgrades in 1967 was the change from a single-reservoir to a dual-reservoir brake master cylinder which provided much safer braking by separating the front and rear brake fluid lines.  This way, if your rear brakes sprung a leak, the h-block would trip to block the rear fluid and the front lines would still work to bring you to a stop.  In 1967, the Ford Bronco also received backup lights which was an added safety feature not found in 1966.  The 1967 Ford Bronco also was the first year that Ford Motor Company offered the popular Sport package for the early Bronco which included bright beltline trim and other custom accents.

If, for some reason you cannot find what you need we strongly encourage you to give us a call at 541-779-1339 or email us at so that we can help you out.

Shop Ford Bronco Parts

1967 Ford Bronco Factory Specifications – 14,230 Units Made


Wheelbase = 92.0″
Track = 57″ (Front),  57″ (Rear)
Overall Length = 152.1″
Overall Width = 69.1″
Overall Height = 70.8″
Ground Clearance = 8.6″


# of Passengers = 4
Main Fuel Tank = 14.5 gallon
Auxiliary Fuel Tank = 11.5 gallon
Engine Oil = 5.0 quarts
Transfer Case = 2.75 pints


Front Differential = Dana 30 w/Drum Brakes
Rear Differential = Ford 9″ w/Drum Brakes
Transfer Case = Dana 20
Transfer Case Shifter = T-style Chrome Shifter Handle w/Indicator Base
Steering Gear Ratio = 24.1 (Factory Manual Steering)
Steering Gear Turns Lock to Lock = 5.3
Steering Linkage = T-Style
Turning Circle Radius = 36.6 ft (Wall to Wall)
Weight Distribution = 50% Front/50% Rear


Dual-Line Hydraulic
Front Drum = 11″ dia. x 2″ width
Rear Drum (Big Bearing) = 11″ dia. x 1.75″ width
Rear Drum (Small Bearing) = 10″ dia. x 2.5″ width


Wheel Size = 15″ dia. x 5.5″ width
Optional Wheel Size = 16″ dia x 5.0″ width
Bolt Pattern = 5 x 5.5


Standard = 170 cu. in., Inline 6 cylinder
Optional = 289 cu. in., V8
Igniton = Points

Additional Information:

Wipers = Vacuum Controlled
Side Marker Lights = NONE
Emergency Flasher Switch = On Dash