Front Disc Brake Proportioning Valve w/Bracket & Mild Hard Line

This Proportioning Valve Kit includes the parts needed to convert your Drum Brake Junction H-Block to a Prop Valve.

Prop Valve Kit includes the following:

• Proportioning Valve w/Wiring Pigtail
• Proportioning Valve Mounting Bracket
• Steel H-Block to Prop Valve Conversion Line

Please select if you have Front Discs only or 4-Wheel Disc Brakes from the drop down menu. This prop valve setup mounts to the factory mounting location on the frame. The bracket and line are direct replicas of the factory original components. The proportioning valve is a high quality, aftermarket brass combination valve. The benefit of this valve is that it correctly proportions the brake fluid sent to the front and back of the Bronco. When converting to disc brakes, the calipers require more fluid to actuate than the drum wheel cylinders. If you send too much fluid to the drums, they will lock up. This valve proportions the fluid so that more fluid is sent to the calipers than the drums so that you can get full use out of your new brake setup.