Turn Signal Flasher for LED Bulbs

This flasher is designed to use with LED bulbs in place of the factory turn signal flasher. This is needed because the factory flashers will not work when LED bulbs are installed due to a lack of power draw from the bulbs. A factory flasher takes this to mean the bulb is burnt out and will not flash. This flasher is designed to be used with the low power LED bulbs, but requires directional wiring in order to work whereas the factory flasher did not have this requirement. Some early Broncos will be able to plug right into this flasher and work immediately. Others will need the included adapter to be installed in order to work properly. Two flashers are required per Bronco.