TOMS OFFROAD 44 Mag Dana 44 Front End w/Power Lock

Part of our Trail Terminator line of extreme duty off-road Bronco products, The TOMS OFFROAD 44 Mag is a heavy duty Dana 44 made 100% in the USA. The 44 Mag features a ductile iron casting and heavy duty axle tubes. The housings have the factory C-wedges for use with the early Bronco front radius arm suspension. The tubes are 3 inch x .375 inch wall and have standard outer knuckle C's so your factory Bronco Dana 44 knuckles can be used. These are completely custom-built units that are made to TOMS OFFROAD specifications. They provide a stronger assembly than the factory Dana 44 and enormous strength gain over the inferior Dana 30. NOTES: Housings do not include ball joints, High pinion version utilizes heavy duty JK ring & pinion and bearings but maintains factory Dana 44 carrier.

With our new 44 Mag Dana 44 we added 4 degrees of positive caster to the outer Cs and on the low pinion Dana 44 we rotated the pinion upward 2 degrees to help with drive shaft angles.