31 Spline Axles - 10" Big Bearing for 74-75 Bronco
$310.00
$279.00
New 31 Spline Axles for 74-75 Broncos with 10 inch Drum Brakes & 3-1/8 inch Bearing. Axles come with wheel studs, Set 20 Bearings and seals and retainer plates. These axles fit 74-75 Bronco's with 3 1/8 diameter bearings and 3/8 retainer bolts and 10 drums.
Our 31 spline axle shafts are up to 60% stronger than factory 28 spline axles! This is achieved by compounding the added strength of using more splines which are rolled rather than cut with the use of stronger 1541H heat treated steel.
These axles are heat inducted and have rolled splines for hard core use. The set 20 Bearing is lubricated by the differential gear oil for extended bearing life and heavy load capacity. Drum measurements are made from the inside of the drum.
Our 31 spline axle shafts are up to 60% stronger than factory 28 spline axles! This is achieved by compounding the added strength of using more splines which are rolled rather than cut with the use of stronger 1541H heat treated steel.
These axles are heat inducted and have rolled splines for hard core use. The set 20 Bearing is lubricated by the differential gear oil for extended bearing life and heavy load capacity. Drum measurements are made from the inside of the drum.
Fit
1974-75 Ford Bronco
Technical Specs
Axle utilizes a Set 20 axle bearing which gets lubricated from the differential fluid for extended life. This eliminates the factory outer axle seal.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more
-
1 of 1 Rear Axles - Driver & Pass, 10'' Drums, 31 Spline, 3 1/8'' Bearing, 74-75 Ford Bronco