Master Cylinder Spacer, Factory 1976-77 Non-Power Disc

This is a direct replacement for your 1976-77 Ford Bronco manual disc brake master cylinder spacer. This spacer was required to push the master cylinder out so that the master cylinder lines could clear the throttle linkage. The reason for this is that Ford used the same master cylinder for power brakes and manual brakes in 1976 & 1977. This master cylinder had lines exiting on the engine side and would run directly into the throttle linkage assembly if the master cylinder was not spaced off the firewall. This spacer requires and does not include the factory manual brake push rod found in your 1976 or 1977 Ford Bronco.

This push rod is currently unavailable, so if you do not have it already we highly suggest going an alternate route such as installing a power brake kit upgrade.