Front Disc Brake Conversion

Starting from: $855.00 $769.50

Upgrade your early Ford Bronco's braking system with our front disc brake conversion kit. Originally equipped with drum brakes from 1966 to 1975, these Broncos faced risks such as locking up under pressure or slipping when wet. Our all-new parts ensure reliability and performance. With disc brakes, you'll experience smoother braking, reduced skidding, and improved control, even in wet conditions. Don't compromise on safety and performance - make the switch to disc brakes today.

Options include standard or drilled and slotted rotors. Choosing a Premium Locking Hub will automatically select our Premium Front Disc Brake Conversion Kit.

Our Standard Front Disc Brake Conversion Kit includes:

New Front Disc Brake Backing Plates
New Loaded Calipers for Front Disc Brake Kit
New Front Disc Brake Spindles w/Seals
New Front Disc Brake Hub & Rotor Assemblies w/Races
New Braided Stainless Steel Disc Brake Caliper Hoses
Installation Hardware & Instructions.

Our Deluxe Front Disc Brake Conversion Kit includes everything in our Standard Kit, but adds:

Disc/Drum Proportioning Valve w/Mounting Bracket

Our Premium Front Disc Brake Conversion kit for 66-75 Ford Broncos includes everything in our Standard and Deluxe Front Disc Brake kits plus the following:

TBP Premium Locking Hubs
Wheel Bearings for Front Disc Brakes
Spindle Nut Removal/Installation Tool
H-Block to Prop Valve Conversion Brake Line

Choosing a Premium locking hub will automatically select the premium kit.

NOTE: Must use TOMS OFFROAD Locking Hubs or other aftermarket locking hub setup with this kit. This kit will clear MOST 15 inch wheels. Shown with optional slotted & drilled rotors.

Files

2430_-_Front_Disc_Brake_Kit_Instructions.pdf (2.1MB)

Fit

1966-75 Ford Bronco

Technical Specs

Fits 66-77 Ford Broncos with Factory Dana 30 or Dana 44 Front Differentials. For Broncos with Dana 30 front end, you will need to purchase spindle seals as well. There are two styles of spindle seal for the Dana 30; seals for axles with slingers and seals for axles without slingers. If you are unsure whether your Dana 30 axles have slingers, you can purchase the #3509B Spindles Seals w/o Slingers and simply remove your slingers and install.

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more