Rear Disc Brake Conversion Kit

Our Rear Disc Brake Kit is now available with SLOTTED & DRILLED ROTORS!
 

This BRAND NEW Rear Disc Brake Kit includes:

• 2 x Rear Disc Brake Rotors
• 2 x Rear Disc Caliper Brackets
• Driver & Passenger Rear Disc Brake Calipers w/Ceramic Pads
• 2 x Braided Stainless Steel Rear Disc Brake Caliper Hoses
• Steel Hard Lines for Rear Differential
• Driver & Passenger Extended Emergency Brake Cables for Rear Disc Kit
• 2 x Axle Bearing Retainer Plates

This is a bolt on rear disc brake kit with with the exception of the brake line brackets which should be welded to the differential. The rotors slide over your axles with no machining of the axles required.
Please select if your Bronco has 10'' or 11'' inside diameter rear drums.

INSTALLING THIS KIT WITH STOCK STEEL WHEELS OR 15x7 US MAGS WILL REQUIRE SPACERS FOR CLEARANCE.  If you have factory 5 1/2 inch wide wheels, you will need a 1/2 inch spacer along with longer axle studs. If you have factory 6 inch wide wheels, you will need a 1/4 inch spacer.

NOTE: In Bronco applications, the 10'' kit will use 3/8'' axle retainer bolts. The 11'' kit uses 1/2'' axle retainer bolts. This is a GREAT way to identify if you have 10 inch or 11 inch brakes if you are unable to locate the backing plate numbers as detailed below.
 
 BACKING PLATE NUMBERS: It is essential for the customer to retrieve a backing plate number so that we can ensure you get the correct parts the first time. A photo has been supplied as to where to locate the backing plate number. The picture is referencing to the driver side. There is also a number located in the same position on the passenger side if driver side is unreadable.