11 inch Clutch Kit, SBF V8, 66-77 Ford Bronco

$220.00

New Diaphragm Style Clutch Kit for 66-77 Ford Broncos with 289, 302 or 351w V8 Engines.

High quality V8 Early Bronco Clutch Kit Includes:

Pressure Plate
Clutch Disc
Clutch Pilot Tool
Throwout Bearing

Clutch chatter got you all shook up? Install a new diaphragm style clutch kit in your Classic Bronco. The diaphragm style pressure plate uses 18 release fingers to provide a much more solid and even engagement than the original 3 finger style. This gives you an easier clutch pedal and a smooth engagement.

These clutch kits fit both the stock flywheels and most aftermarket replacements.

We also recommend the roller pilot bearing #3960.

Fit

1966-77 Ford Bronco 289/302/351W V8

Technical Specs

Fits 66-77 Ford Broncos w/289, 302 or 351W engine. If you have a factory 10" clutch, you must also replace your flywheel at the same time.

NOTE: The recess in your flywheel surrounding the mounting bolts must be 5" diameter or greater for this clutch kit to work. Our new flywheels have a 5 1/2" opening at this location. Some original flywheels are bevel cut inward and these flywheels would need to be machined to work.

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more