- Welcome
- 66-77 Ford Bronco
- Drivetrain & Transmission
- Differentials
- Ford 9 inch Rear End
- Ford 9 inch Drop-Ins & Housings
- FABRICATED Ford 9 inch Rear Axle Housing - Big Bearing, 11 inch Drum Style
FABRICATED Ford 9 inch Rear Axle Housing - Big Bearing, 11 inch Drum Style
66-77 Ford Bronco
Condition: New
Part Number: 2989
0 reviews
Price:
$799.00
SELECT YOUR OPTIONS IN THE DROP-DOWN: This item comes bare (no spring perches, no back truss). You can add these components.
At this time, you can either have the perches welded on, OR the back truss, but NOT BOTH. The reason is due to the fact modifications have to be made to the truss in order for the perches to clear properly, and simply requires too much time for us to make these modifications in-house.
Also, due to most customers using this type of housing will have custom suspension setups, this housing does NOT include rear shock mounts.
This NEW Fabricated Ford 9 inch Rear Axle Housing is made exclusively for TOMS OFFROAD to our specifications. This housing is considerably stronger than the factory housings including the 1977 Ford Bronco rear housing which is commonly sought after for its strength. If you're building an off-road oriented Bronco, or just want a housing you never have to worry about, this is for y ou.
Housing Features:
At this time, you can either have the perches welded on, OR the back truss, but NOT BOTH. The reason is due to the fact modifications have to be made to the truss in order for the perches to clear properly, and simply requires too much time for us to make these modifications in-house.
Also, due to most customers using this type of housing will have custom suspension setups, this housing does NOT include rear shock mounts.
This NEW Fabricated Ford 9 inch Rear Axle Housing is made exclusively for TOMS OFFROAD to our specifications. This housing is considerably stronger than the factory housings including the 1977 Ford Bronco rear housing which is commonly sought after for its strength. If you're building an off-road oriented Bronco, or just want a housing you never have to worry about, this is for y ou.
Housing Features:
- 1/4 inch Fabricated Steel Center Section
- 3 inch DOM, .250 wall Tubes
- 3/8 inch thick Mounting Flanges
- Uses Set 20 or Factory Big Bearing Axles & Seals
- For 11 inch Drum/Disc Brakes
- Includes Drop-in Flange Studs & Bearing Retainer Studs
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more
