28 oz Clutch Flywheel, 164 Tooth, SBF V8
$165.00
$148.50
New Clutch Flywheel for 66-77 Ford Broncos with Manual Transmission fits 289, 302 & 351W engines. This flywheel has 164 teeth on the starter ring gear. The flywheel is 28 oz Balance for use in 302 V8 engines built prior to 1981 as well as all 289 & 351 Windsor engines. If you are unsure of the balance of your 302, please check with an engine shop prior to purchasing or call with the casting number off the block to confirm.
MUST use a NEW Clutch Pressure Plate with this flywheel
Fit
1966-77 Ford Bronco
Technical Specs
This flywheel is for Broncos with 164 tooth flywheels and 11" clutch. If you have a factory 3-finger style clutch, you must upgrade to the improved diaphragm style clutch to use this flywheel. If you have a 302 that was built in 1981 or later you will need a 50 oz Balance Flywheel instead.
REMEMBER: You MUST use a modern diaphragm style clutch when installing these new flywheels.
REMEMBER: You MUST use a modern diaphragm style clutch when installing these new flywheels.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more
-
1 of 1 28 oz Clutch Flywheel, 164 Tooth, SBF V8, 66-77 Ford Bronco
