Tire Carrier Pivot/T-Style Shifter Bushing, 67-77 Ford Bronco
$5.00
$4.50
New Tire Carrier Pivot Bushing for 67-77 Classic Ford Broncos. This pivot bushing goes into the top and bottom of the tire carrier corner support horns to provide a plastic bushing between the supports and the tire carrier loop. 4 bushings are required per Bronco (2 for the lower corner support and 2 for the upper corner support).
This bushing is also used to fix slop in the Factory T-Style Transfer Case Shifter for 66-72 Bronco. Req. 2 per Bronco for this application
This bushing is also used to fix slop in the Factory T-Style Transfer Case Shifter for 66-72 Bronco. Req. 2 per Bronco for this application
Fit
1967-77 Ford Bronco
Technical Specs
Fits 1967 to 1977 Ford Bronco. Requires 4 per Bronco (2 on upper support hinge and 2 on lower support hinge).
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Learn more
-
1 of 1 Tire Carrier Pivot/T-Style Shifter Bushing, 67-77 Ford Bronco