Rear Drum Brake Rebuild Kit - 11", Big Bearing, 1976-77 Ford Bronco

1976-1977 Ford Bronco Rear Drum Rebuild Kit. You must use your existing backing plates.

THIS KIT INCLUDES:

• Two new rear 11 x 2.25 inch steel drums
• One new set of rear brake shoes
• One new rear brake spring/hardware kit
• One new driver side rear wheel cylinder
• One new passenger side rear wheel cylinder
• One new driver side rear self adjuster kit
• One new passenger side rear self adjuster kit

BACKING PLATE NUMBERS: It is essential for the customer to retrieve a backing plate number so that we can ensure you get the correct parts the first time. A photo has been supplied to show where to locate the backing plate number. These backing plate numbers are for 11-inch drums with big bearing (3 1/8 inch) setups that were found in 1976–77 Broncos. If your number is not listed here, please check our other drum brake rebuild kits to see if it matches. The picture references the driver side. If the number is unreadable, there is also a number in the same position on the passenger side.