Transmission Adapter Shaft Kit - Truck T&C Overdrive 4-spd

This shaft kit is designed to replace the main shaft/output shaft in a Truck T&C Overdrive 4-speed Top-Loader RUG Transmission found in 80-89 Ford Trucks and adapt it to the Bronco three speed adapter housing.

NOTE: There are two basic styles of the 3-speed overdrive Ford transmission. The first is the RAM that is not compatible with our adapter kits. These transmissions have the gear shift levers mounted in the rear extension housings. The model that is required for use with this kit is the RUG that has an aluminum case which is 10-1/4 inches long and has a casting number of 2603606 or 2603729. This model has the shift levers that are on the left hand side of the main case. There are two different cases for the RUG transmission and these two differ from the size of the rear bearing. The shaft that we have supplied with this kit is only available for the larger bearing size or truck type transmissions. If you attempt to use the car type transmission with this kit, the case will need to be machined and a new bearing will be required.

NOTE: The intermediate housing will require machine work for installation