White Wiper Cover for BESTOP Soft Tops

Review by: SB, Jul 16, 2018  

The part fit perfectly.....your products are of high quality and in most cases a direct replacement with little to no modification required.

Review by: Matthew, Feb 20, 2021  

This is a fine product and I'm using it, but prospective buyers should know that it is BRIGHT white out of the box. It is not at all close to the parchment color of my interior. But I figured out an easy way to make it match: go to a craft store like Michaels and buy some "alcohol dyes" in yellow and brown. The package might say "dye based" and/or for "non-porous surfaces". You will also need some felts, makeup pads or paper towels to apply it with and a bottle of rubbing alcohol (I used 91%) to wipe the vast majority of it off once you've applied it. Clean the cover well with acetone or similar to make sure you get off anything that might make it even less porous. Put on some rubber gloves unless you want dyed fingers for the next few weeks. Mix your yellow and brown ink to get as close a tone as possible -- test it on the BACK SIDE of the cover until you get the right ratio -- for me it was two drops of brown to five drops of yellow. Don't be alarmed that it will look much too dark until you wipe virtually ALL of it back off. As soon as you coat a section with the ink blend, soak another clean rag well with the rubbing alcohol and do just that -- wipe off 99.9% of it. If it looks too dark add more alcohol to the rag and rub a bit more. What will be left is an almost perfect parchment tone (at least for me), and even a little variation in tone to match the vinyl.