Air Conditioning Builder Kit by Vintage Air - AC/Heat/Defrost, No Compressor, Universal Hoses, Builder Series, Under-Dash Plenum

These kits are made to order and can take 2-3 weeks for delivery. If concerned about delivery time, please call before ordering and we will request a timeframe from Vintage Air prior to ordering.

This kit is the "Builder's Series," meaning it does not include a compressor (so you can use your own compressor), and the hoses that are included are a universal style, in which case you would have your own fittings put on the compressor side of them.

TOMS OFFROAD is proud to offer Vintage Air, Air Conditioning Kits. This kit incorporates air conditioning, heater and dehumidified defrost into one unit. Newly improved design offers better heating & cooling. You must provide your own v-belt. You will use your factory defrost duct. We have these new as well. See Defrost Duct for these parts. This a/c kit will require some modification to mount in your early Bronco. Please see the video below for details on the main modifications needed.

NOTES: Compressor mounts where top radiator hose should be, so you will need to route the radiator hose over the compressor. Be sure to add one of our custom upper radiator hoses to your order by selecting either a silicone or rubber version above (factory hose will NOT work).  We recommend placing a protective sleeve over the hose where it will lie upon the compressor to keep the hose from being damaged. A/C kit comes with a new glovebox insert which is not as deep as the original to allow for clearance of the a/c kit. If you have a custom glove box, be prepared to make modifications for fitment. You also may need to trim the fan shroud in order to create clearance for the compressor. 351W installation may require additional modification.

Shipping is a flat rate of $225 for this item.

Installation with Power Steering requires a custom bracket. Please select your option from the drop-down.