Rear Disc Brake Conversion Kit

Our Rear Disc Brake Kit is now available with SLOTTED & DRILLED ROTORS!

This BRAND NEW Rear Disc Brake Kit includes:

• 2 x Rear Disc Brake Rotors
• 2 x Rear Disc Caliper Brackets
• Driver & Passenger Rear Disc Brake Calipers w/ Ceramic Pads
• 2 x Braided Stainless Steel Rear Disc Brake Caliper Hoses
• Steel Hard Lines for Rear Differential
• Driver & Passenger Extended Emergency Brake Cables for Rear Disc Kit
• 2 x Axle Bearing Retainer Plates

This is a bolt-on rear disc brake kit, except for the brake line brackets, which should be welded to the differential. The rotors slide over your axles with no machining required.

Please select if your Bronco has 10" or 11" inside diameter rear drums.

INSTALLING THIS KIT WITH STOCK STEEL WHEELS OR 15x7 US MAGS WILL REQUIRE SPACERS FOR CLEARANCE. If you have factory 5 1/2-inch wide wheels, you will need a 1/2-inch spacer along with longer axle studs. If you have factory 6-inch wide wheels, you will need a 1/4-inch spacer.

NOTE: In Bronco applications, the 10" kit will use 3/8" axle retainer bolts, while the 11" kit uses 1/2" axle retainer bolts. This is a GREAT way to identify if you have 10-inch or 11-inch brakes if you cannot locate the backing plate numbers.

BACKING PLATE NUMBERS: It is essential to retrieve a backing plate number to ensure you receive the correct parts the first time. A reference photo has been provided to locate the backing plate number, typically found on the driver’s side. If unreadable, check the passenger side.

SEE INSTRUCTIONS HERE