Transmission Adapter Shaft, Top-Loader Car 4 Speed, 66-77 Ford Bronco

This shaft kit is designed to replace the main shaft/output shaft in a car 4-speed typically out of an early Mustang and adapt it to the Bronco three speed adapter housing.

NOTE: The Ford Toploader Transmission that is compatible with our kits must have a case length of 10 1/4 inch, and the material must be cast iron. The casting numbers could be C8AR-7006D or D2AR-7006CB. The gear shift linkage is on the left side of the case and the inspection cover that is mounted on the top is held down with 10 bolts. 

NOTE: The intermediate housing will require machine work for installation